Specialty Tools

67850 - OBSOLETE AT FACTORY SPARK PLUG GAPPER & FEELER GAUGE

6 Spark Plug Gap Wires, Electrode Bending Tool, and 12 Steel Blades. Precision wires and blades for doing both spark plug and ignition system settings. Blades are approximately 1/2" wide by 3 1/2" long.

67870 STANDARD / HIGH ENERGY SPARK PLUG GAUGE & GAPPER

Gauges and Gaps all Types of Spark Plugs from .020" to .100" (.50mm to 2.53mm). Tapered edge for gauging spark plugs. Specially designed hole with flange adjusts side wire of plug without pressuring center electrode. ÿ

67900 ELECTRONIC IGNITION SPARK PLUG GAPPER

67900 ELECTRONIC IGNITION SPARK PLUG GAPPER

67950 STANDARD FEELER GAUGE

15 Steel Blades. One 2" Steel Rule. Precision blades ensure accurate measurements. Blades are approximately 1/2" wide by 3 1/2" long.

68000 MINI FEELER GAUGE

16 Steel Blades. Precision blades ensure accurate measurements. Blades from .010" to .035" (.254 - .889mm) are approximately 1/4" wide by 1 3/4" long.

68050 VALVE TAPPET FEELER GAUGE

11 Offset Steel Blades. Precision blades are offset at the proper angle for adjustment of valve tappets. Blades are approximately 1/2" wide by 4" long.

68100 DELUXE FEELER GAUGE

31 Blades. 1 Brass Blade .010". Precision blades ensure accurate measurements. Blades from .0015" to .035" (.038 - .889mm) thickness are approximately 1/2" wide by 3 1/2" long.

68150 GO-NO-GO FEELER GAUGE

22 Steel Blades. Precision stepped blades have a .002" step for accurate settings. Blades from .004" to .027" (.102 - .686mm) are approximately 1/2" wide by 3 1/4" long.

68200 - OBSOLETE AT FACTORY BRASS FEELER GAUGE

6 Brass Blades. Precision blades are non-magnetic, for use in adjusting reluctor air gap on electronic ignition systems. Blades are approximately 1/2" wide by 3" long.

31320 - OBSOLETE AT FACTORY 3 JAW REVERSIBLE 2 TON PULLER

3 Jaw, 2 Ton Puller 3 Jaw, 2 Ton Puller. 3-1/2" Reach and 4" Spread.

31330 - OBSOLETE AT FACTORY 2 OR 3 JAW REV. & ADJ. 5 TON PULLER

2 or 4 Jaw Reversible & Adjustable 5 Ton Puller 2 or 3 Jaw Reversible & Adjustable 5 Ton Puller. 5-1/2" Reach and 7" Spread.

38850 - OBSOLETE AT FACTORY PULLEY PULLER / INSTALLER

Removes and installs pressed on power steering, alternator and air pump pulleys. Makes removing pressed on pulleys an easy job. This puller will remove and install pulleys on most GM, Ford and Chrysler vehicles. Special adapters are included for GM 3.1...