Valve tools

Valve Spring Compressor AI020027

Valve Spring compressor Compresses overhead valve springs with rocker arm studs. This tool can be used with the head either on or off the engine. Jaws adjust to fit most domestic and import overhead valve engines. Adjustable handle allows for clearance...

Valve Keeper Remover and Installer

Removes Valve Keepers On Overhead Valve Engines. Push or tap tool with a hammer to remove valve keepers. Magnetic tool body captures the keepers for quick removal and valve disassembly. To install, load keepers into the installer. Push or tap to install...

Valve Spring Compressor LIS16750

Features and Benefits: Makes compressing the spring and removing the keepers a simple job No need to remove the cylinder head Adjustable cam action No need to readjust the tool after each spring Use with putting compressed air into the spark plug hole...

Valve Lapper LIS21200

For Hand Lapping Valves.Thick handles for easy lapping. 21100 has 1 1/8 and 1 3/8 inch diameter cups for larger valves. 21200 has 5/8 inch and 13/16 inch diameter cups for smaller valves.  

Valve Spring Compressor LIS44300

High Leverage Allows One-Hand Operation. Exceptionally strong, rigid frame, weighs only 6 lbs. Works with nearly all valve-in head and L-head engines as well as truck and tractor engines.  

Valve Tappet Feeler Gauge

11 Offset Steel Blades. Precision blades are offset at the proper angle for adjustment of valve tappets. Blades are approximately 1/2 inch wide by 4 inch long. 11 Offset Steel Blades. Precision blades are offset at the proper angle for adjustment of...

Valve Lapper

For Hand Lapping Valves.Thick handles for easy lapping. 21100 has 1 1/8 and 1 3/8 inch diameter cups for larger valves. 21200 has 5/8 inch and 13/16 inch diameter cups for smaller valves. For Hand Lapping Valves.Thick handles for easy lapping. 21100 has...

Small Engine Valve Spring Compressor

For Springs 3/4 inch to 1 1/16 inch. Heavy-duty frame and screw for rigidity. Two jaw sizes. For Briggs and Stratton, Clinton, Harley-Davidson, etc. For Springs 3/4 inch to 1 1/16 inch. Heavy-duty frame and screw for rigidity. Two jaw sizes. For Briggs...

14mm and 18mm Air Operated Valve Holder

For Both 14mm and 18mm Spark Plug Threads.Commonly used when valve springs or valve stem seals are replaced. Air pressure helps prevent the valve from falling into the combustion chamber. Comes with two-step fitting for both 14mm and 18mm threads. Heavy...

Rocker Stoppers (Discontinued)

Plug Oil Holes in Ball-Joint Type Rocker Arms. Spring steel clips with gaskets stop splashing, squirting hot oil while you adjust clearance. Designed for cars with hollow, oil-fed push rods.  

Universal Overhead Camshaft Valve Spring Compressor

Features & Benefits Can be used with cylinder head on the engine and in vehicle or cylinder head removed Multi point adjustability for proper alignment of depressing tube with valve stem Positive attachment of depressor handle to pivot bar through a...

Valve Core Torque Tool

Helps prevent valve core leaks causing low tire pressure and possible TPMS alerts Slim design allows access in tight spots Torque tool is set to 4 inch pounds to prevent under and over torquing the valve core Lightweight, will fit in mechanic's pocket...