1/4 Inch Striking Letters A-Z 27 Pieces Set 42L6

Made of high carbon steel with heat treatment induction tip, wich provides high resistance to impact and deformation.  Striking area with bevel edge to reduce the risk of release splinters.

1/4 Inch Striking Numbers 0-9, 9 Pieces Set 42N6

Made of high carbon steel with heat treatment induction tip, wich provides high resistance to impact and deformation.  Striking area with bevel edge to reduce the risk of release splinters.

10 Inch Short Tapered Drift Punch 96-1/2

Drift pins are used to install or remove guide bushings, pins, and center guides. Their length is important and it depends on the job. Straight pins can also be used to align holes when assembling parts. Straight tip, ideal for installing or removing...

10 Inch Short Tapered Drift Punch 96-1/4

Drift pins are used to install or remove guide bushings, pins, and center guides. Their length is important and it depends on the job. Straight pins can also be used to align holes when assembling parts. Straight tip, ideal for installing or removing...

10 Inch Short Tapered Drift Punch 96-3/4

Drift pins are used to install or remove guide bushings, pins, and center guides. Their length is important and it depends on the job. Straight pins can also be used to align holes when assembling parts. Straight tip, ideal for installing or removing...

10 Inch Short Tapered Drift Punch 96-3/8

Drift pins are used to install or remove guide bushings, pins, and center guides. Their length is important and it depends on the job. Straight pins can also be used to align holes when assembling parts. Straight tip, ideal for installing or removing...

10 Inch Short Tapered Drift Punch 96-5/16

Drift pins are used to install or remove guide bushings, pins, and center guides. Their length is important and it depends on the job. Straight pins can also be used to align holes when assembling parts. Straight tip, ideal for installing or removing...

10 Inch Short Tapered Drift Punch 96-5/8

Drift pins are used to install or remove guide bushings, pins, and center guides. Their length is important and it depends on the job. Straight pins can also be used to align holes when assembling parts. Straight tip, ideal for installing or removing...

10 Inch Short Tapered Drift Punch 96-7/16

Drift pins are used to install or remove guide bushings, pins, and center guides. Their length is important and it depends on the job. Straight pins can also be used to align holes when assembling parts. Straight tip, ideal for installing or removing...

11 Pieces Hollow Punches Set 49901

Hitting area, built in handle. Redesigned chuck, capable of holding more than one punch at a time, with retractable centering tip. Gun-type handle, for a more secure and comfortable hit that avoids vibration keeping the hand away from the area of hit...

12 Inch Cold Cut Chisels 86A-1x12

Designed to remove, cut or break materials with a hardness softer than the chisel’s, such as concrete, rock, slag, brass, untreated steel, nuts, bolts, pins, etc. It is widely used in the construction industry, as well as in the installation and...

12 Inch Cold Cut Chisels 86A-3/4x12

Designed to remove, cut or break materials with a hardness softer than the chisel’s, such as concrete, rock, slag, brass, untreated steel, nuts, bolts, pins, etc. It is widely used in the construction industry, as well as in the installation and...