Product Description
Air Hammer Heavy Duty Air Hammer (2707) and four Air Chisels (2630
- Always position the chisel parallel with laminations, otherwise you may blunt the cutting end or gouge the laminations.
- Try not to hit the stator housing after cutting the last wires or you may break or damage the cutting end.
- When using an air hammer, don't press the trigger unless the chisel is pressing against the coil. Otherwise you could break the chisel shank. Properly used shanks should never break.
- Never mark a chisel by grinding groves in the shank as this weakens it and may cause breakage. Use a stick-on label for marking.
- Oil every day before use with air tool or equivalent.
