Product Description
- 12,000 lb. Capacity
- Heavy Duty, Commercial Grade
- Extra Tall, Extra Wide & Extra Long
- Diamond Plated Runways
- Air Operated Single Point Lock Release
- Lock Ladder Design
- Double Lock Safety System
- Powder Coat Finish
- Steel Approach Ramps Included
- Additional Drive off Ramps Available (Sold Separately)
- Runway Extensions Available (Sold Separately)
- Mounting Hardware Included
- 220volt/1phase Electric Operation (equires a 30amp Breaker)
- 5 Year Structural/2 Year Hydraulic Warranty
- Shipping Weight: 2,500 lbs.
- Freight Prepaid
The Atlas® 412 12,000 pound capacity heavy duty four post lift is designed and built to commercial grade standards and will provide many years of service. Our Atlas® lifts offer many exclusive features not found on many other competitor's lifts.
The Atlas® 412 incorporates many structural and cosmetic features that are found on lifts costing thousands of dollars more money. The Atlas® 412 is tested to ensure that this lift system will perform flawlessly at its rated capacity. The Atlas® 412 has been manufactured to the same exacting specifications for many years.
The Atlas® 412 uses a high strength cable system (with a under runway oversized hydraulic cylinder) powered by a 220 volt (single phase) power unit to raise and lower the lift. Many competitors use an "old style" chain lifting system with an exposed hydraulic cylinder system. Old style chain lifts are difficult to "level" properly and the exposed hydraulic cylinder is responsible for numerous "door dings".
Finally, the Atlas® 412 features "tracks" between the runways to allow the use of a rolling bridge jack (such as the Atlas® RJ6BK) on the lift. Rolling jacks sold separately.
Atlas® ATPK-412 Specifications:
- Capacity: 12000 lbs
- Lifting Height, Top of Runway: 73 1/2" (6' 1 1/2")
- Clearance Under Runways: 67 7/8" (5' 7 7/8")
- Height of Columns: 86" (7' 2")
- Overall Width: 126 1/4" (10' 6 1/4") w/ motor 135 1/4" (11' 3 1/4")
- Overall Length w/ Ramps: 236 1/2" (19' 8 1/2")
- Runway Length: 195" (16' 3")
- Runway Width: 20"
- Runway Thickness: 5 5/8"
- Width Between Runways: 43 1/4" w/ Rail 39 3/4"
- Outside Runway to Outside Runway: 83 1/4" (6' 11 1/4")
- Clearance Between Columns: 112 1/4" (9' 4 1/4")
- Length Between Columns: 184 1/4" (15' 4 1/4")
- Drive Thru: 98 3/8" (8' 2 3/8")
- Motor/Electrical Requirement: 220volt/1phase, 30 amp breaker required
- Oil Requirement: 3-5 Gallons AW32 or AW46 (NOT INCLUDED)
- Shipping Weight: 2500 lbs
| Weight | 2400.000000 |
|---|---|
| Brand | ATLAS AUTOMOTIVE EQUIPMENT |
