Product Description
Features & Benefits:
- ALI Certified Lift
- 15,000 lb. Capacity
- Heavy Duty, Commercial Grade
- Extra Tall & Extra Wide
- Overall Height 174 1/2" (14' 6 1/2")
- Padded Carriages
- Symmetric Arms
- Professional Grade Arm Lock Restraint System
- Dual Direct-Drive Hydrualic Cylinders
- Free 8 Piece Truck Adapter Set and 4 Screw-Up Frame Adapters
- Heavy Duty 3/8" Equalization Cables
- Mounting Hardware Included
- Standard with Premium ALLY Powerunit
- Shipping Weight: 2,600 lbs.
- 5 Year Structural Warranty/2 Year Hydraulic Warranty/2 Year Powerunit Warranty
- This part number for Will Call only
- AP-PVL15-2 (Manufacturer Part #)
The Atlas® Platinum AP-PVL15 is a 2-post commercial grade Heavy-Duty lift designed with the professional shop in mind. The 15,000 lb. weight capacity allows this lift to not only handle passenger cars, but also has the ability to lift a variety of vans and heavy trucks. An optional height extension kit is available to add an extra two (2) feet of overall height, allowing the lift to accommodate taller vehicles.
The Atlas® Platinum AP-PVL15 is also ALI certified and backed by one of the industry’s best warranties for an added peace of mind.
The Platinum AP-PVL15 comes with a premium ALLY Hydraulic power unit. These units are certified by MET Laboratories to meet UL201 compliance standards. The ALLY power unit also features:
- 2.1 Gallons per Minute flow rate
- 208 – 230 volt single phase (60 Hz).
- 2 hp 3450 rpm motor (3.5 hp motor torque equivalent).
- 3.5 – Gallon opaque high-density plastic tank
- Pressure settings from 2300 to 3500 PSI.
- Extra-large junction box for easy installation
- Extra Heavy-Duty Honeywell BE22Q1-AL off/on switch.
- 2 Year Warranty includedAtlas® AP-PVL15 Specifications:
- Capacity: 15000 lbs
- Overall Height: 174 1/2" (14' 6 1/2")
- Overall Floor Width: 148" (12' 4")
- Outside Columns: 135" (11' 3")
- Inside Column Width: 119 1/4" (9' 11 1/4"")
- Drive Thru: 107 1/2"
- Max Lift Height w/o Adapters: 72 3/4"
- Max Lift height w/ Adapters: 87 1/2"
- Minimum Arm Height: 6"
- Column Size: 8" x 14 1/2"
- Base of Column: 21" x 48"
- Column Steel Thickness: 8mm
- Arm Steel Thickness: 8mm
- Motor/Electrical Requirement: 220volt Single Phase, 30 amp breaker required
- Oil Requirement: 3-5 Gallons AW32 or AW46 (NOT INCLUDED)
- Shipping Weight: 2600 lbs
- Adapter Heights: 4 Each 5", 10"
- Arm Hole/Adapter Peg Size: 2.75"
| Weight | 2600.000000 |
|---|---|
| Brand | ATLAS AUTOMOTIVE EQUIPMENT |
