Product Description
Great for Fabrication or Scrapping
A favorite for use in heavy maintenance, fabrication and scrap metal, this machine delivers clean cuts on most 1" (25mm) metals including stainless steel, aluminum, mild steel, copper or brass, with minimum heat input & distortion of metal. It also cuts through rusted, painted or coated surfaces without prior surface preparation.
Reliable, Powerful Power Supply
This inverter based power supply operates on standard 230 Volt, single or 3-phase power. (CE model only available at 3 ph.) Simply connect to an air compressor or other air source, and this system is ready to cut.
1Torch? for Excellent Cutting Results
This state-of-the-art torch provides the level of performance and features you would expect from a more expensive torch.
• Precision-engineered consumable parts are easy to change and require no tools.
• Easy-to-use torch trigger release and ergonomic handle provide comfort during long cutting sessions
• Two modes of operation available - standoff cutting or drag cutting
• Latch feature allows the cutting arc to remain active without constantly depressing the torch switch
• Starts without high-frequency so it won't interfere with controls or computers
• Protective interlock circuitry disables the power supply if torch consumable parts are incorrectly assembled
• SureLok? electrode eliminates tip wobble found in some blowapart torch designs, resulting in a cleaner arc and longer parts life
• Light-weight, flexible 20 ft. (6.1m) torch leads
• Full 1-year warranty on repair parts and labor
Cut Capacity:1" (25mm)
Input:230V +/-10%, 1 ph, 50/60 Hz, 67A
230V +/-10%, 1 ph, 50/60 Hz, 37A
400V +/-10%, 3 ph, 50/60 Hz, 23A
400V +/-10%, CE, 3 ph, 50/60 Hz, 23A
Output: 25-70 Amps, Continuously Adjustable
Duty Cycle: 35% @ 70 Amps
Panel Indicators: AC, Over Temp, Air, Latch
Dimensions: H: 16.5" (420mm), W: 9.7" (245mm), L: 21.7" (550mm)
Weight: Net: 66 lbs. (30 kg)
Alternate part number: Thermadyne 1-1670-1
A favorite for use in heavy maintenance, fabrication and scrap metal, this machine delivers clean cuts on most 1" (25mm) metals including stainless steel, aluminum, mild steel, copper or brass, with minimum heat input & distortion of metal. It also cuts through rusted, painted or coated surfaces without prior surface preparation.
Reliable, Powerful Power Supply
This inverter based power supply operates on standard 230 Volt, single or 3-phase power. (CE model only available at 3 ph.) Simply connect to an air compressor or other air source, and this system is ready to cut.
1Torch? for Excellent Cutting Results
This state-of-the-art torch provides the level of performance and features you would expect from a more expensive torch.
• Precision-engineered consumable parts are easy to change and require no tools.
• Easy-to-use torch trigger release and ergonomic handle provide comfort during long cutting sessions
• Two modes of operation available - standoff cutting or drag cutting
• Latch feature allows the cutting arc to remain active without constantly depressing the torch switch
• Starts without high-frequency so it won't interfere with controls or computers
• Protective interlock circuitry disables the power supply if torch consumable parts are incorrectly assembled
• SureLok? electrode eliminates tip wobble found in some blowapart torch designs, resulting in a cleaner arc and longer parts life
• Light-weight, flexible 20 ft. (6.1m) torch leads
• Full 1-year warranty on repair parts and labor
Cut Capacity:1" (25mm)
Input:230V +/-10%, 1 ph, 50/60 Hz, 67A
230V +/-10%, 1 ph, 50/60 Hz, 37A
400V +/-10%, 3 ph, 50/60 Hz, 23A
400V +/-10%, CE, 3 ph, 50/60 Hz, 23A
Output: 25-70 Amps, Continuously Adjustable
Duty Cycle: 35% @ 70 Amps
Panel Indicators: AC, Over Temp, Air, Latch
Dimensions: H: 16.5" (420mm), W: 9.7" (245mm), L: 21.7" (550mm)
Weight: Net: 66 lbs. (30 kg)
Alternate part number: Thermadyne 1-1670-1
A favorite for use in heavy maintenance, fabrication and scrap metal, this machine delivers clean cuts on most 1" (25mm) metals including stainless steel, aluminum, mild steel, copper or brass, with minimum heat input & distortion of metal. It also cuts t
