Product Description
• New 8 Voltage Taps! Providing a wider operating range of 20 to 190 amps with a smooth and stable arc characteristic. Unbeatable performance from 22 gauge to 5/16" thick in a single pass.
• Simple Operation! Just refer to our comprehensive weld set up guide for optimum welding performance over a wide range of materials and shielding gases.
• Higher Output! The Fabricator 190 punches out 190 amp maximum output.
• Quick Change Polarity! Simple, quick change (no tools required) polarity from the front of the power source.
• 33 lb/44 lb Spool Capacity! Wire compartment design allows easy installation of 44lb, 33lb, 10lb, 8" and 12" wire spool sizes.
• Overload Protection! Shuts down the power source to protect the internal electrical components from overheating
• Heavy Duty Transformer! The transformer is built to last using premium quality 428øF materials and fully dip varnished then baked for 4 hours.
• Metal Feed Plate! The metal wire drive system features 2-roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob.
• Easy To Use Cylinder Rack! Single cylinder rack allows easy roll on loading of the gas cylinder.
• ISO 9001 Quality System! The certified quality management system guarantees the manufacture and distribution processes of this product.
• Brilliant Characteristics! Extremely smooth arc and negligible spatter using a wide range of gases, materials and material thickness
• New Gun! Quality Tweco? WeldSkill MIG gun.
Fabricator 190 comes with:
- Power cord and plug
- 10ft, Tweco? WeldSkill MIG gun
- 10ft, work cable and clamp
- Gas regulator/flowmeter
- Factory fitted gear/single cylinder rack
- .023"-.030"/.035" reversible drive roll
- Lifting Point
Specifications
• Processes: MIG, Flux Cored
• Rated Output: 145Amp at 22V, 30% Duty Cycle
• Amperage Range: 30-190 Amp
• Wire Feed Speed: 80-700 IPM
• 208V/230V/60Hz/1Ph.
• Simple Operation! Just refer to our comprehensive weld set up guide for optimum welding performance over a wide range of materials and shielding gases.
• Higher Output! The Fabricator 190 punches out 190 amp maximum output.
• Quick Change Polarity! Simple, quick change (no tools required) polarity from the front of the power source.
• 33 lb/44 lb Spool Capacity! Wire compartment design allows easy installation of 44lb, 33lb, 10lb, 8" and 12" wire spool sizes.
• Overload Protection! Shuts down the power source to protect the internal electrical components from overheating
• Heavy Duty Transformer! The transformer is built to last using premium quality 428øF materials and fully dip varnished then baked for 4 hours.
• Metal Feed Plate! The metal wire drive system features 2-roll drive system, quick change reversible drive rolls and easy-to-set single scaled wire tension knob.
• Easy To Use Cylinder Rack! Single cylinder rack allows easy roll on loading of the gas cylinder.
• ISO 9001 Quality System! The certified quality management system guarantees the manufacture and distribution processes of this product.
• Brilliant Characteristics! Extremely smooth arc and negligible spatter using a wide range of gases, materials and material thickness
• New Gun! Quality Tweco? WeldSkill MIG gun.
Fabricator 190 comes with:
- Power cord and plug
- 10ft, Tweco? WeldSkill MIG gun
- 10ft, work cable and clamp
- Gas regulator/flowmeter
- Factory fitted gear/single cylinder rack
- .023"-.030"/.035" reversible drive roll
- Lifting Point
Specifications
• Processes: MIG, Flux Cored
• Rated Output: 145Amp at 22V, 30% Duty Cycle
• Amperage Range: 30-190 Amp
• Wire Feed Speed: 80-700 IPM
• 208V/230V/60Hz/1Ph.
New 8 Voltage Taps! Providing a wider operating range of 20 to 190 amps with a smooth and stable arc characteristic. Unbeatable performance from 22 gauge to 5/16" thick in a single pass.
