Product Description
Motor: Heavy-duty, high quality cast aluminum enclosed electric motor
Burner Head: 1-piece cast aluminum
Components: Built-in temperature control thermostat with control dial · High performance fan · Integral overheat and flame-out safety · Fuel gauge · Sure start ignition for cold temperature starts · Dual connector ignition
Factory tested for multiple fuels: Kerosene · JP8/Jet A fuel · No. 1 or No. 2 fuel oil · No. 1 or No. 2 diesel fuel
Important Notes:
· Not for use in residential living areas or inadequately ventilated areas.
· Proper ventilation required during operation.
· Must be plugged into an approved standard electrical outlet for operation.
Specifications subject to change without notice. Use in accordance with any and all state or local codes, regulations, and/or ordinances.
Please see heater "Owner's Manual" included with each heater for a complete list of important safety information. These specifications are estimates only.
Specifications:
HEAT OUTPUT: 190,000 BTU
HOT-AIR FLOW : 630 CFM
AIR PUMP PRESSURE : 8.5 PSI
AC POWER: 120V, 60Hz, 2.7 Amps
MOTOR SIZE: 1/4 HP
FUEL TANK CAPACITY: 13.0 gallons
FUEL CONSUMPTION : 1.42 gal./hr
MAX. OPERATING HOURS : 9.1 hours
HEATING AREA : 4,300 sq. ft.
