Product Description
Model 5715MK103 is the entry-level choice when the job calls for more air than a direct drive can offer. Capable of running on a 20 Amp breaker, this model will deliver 7.3 CFM, doubling the output of many direct-drive units. Additionally, the low-RPM pump and motor combine for quiet operation.
Optional Equipment: Filter-Regulator-Lubricator Sets, Dual Voltage Switch, Dual Control Operation.
ABOUT THE PUMP
- Heavy Duty
- Two Cylinder
- Single Stage
- Splash Lubricated
- High-Efficiency Reed Valve Design
- Aluminum-Alloy Connecting Rods
- Multi-Finned 10" Flywheel
- Oil Sight Gauge and 17 oz. Oil Reservoir
ABOUT THE MOTOR
- 1.5 HP
- 1755 RPM
- Low Speed
- Open Drip Proof
- 115/230 Volt – 60 Hz
- Ball Bearings
- Overload Protection with Manual Reset
STANDARD EQUIPMENT
- Pressure Gauge 0-200 in 5 lb. Graduations
- Square D Pressure Switch with Unloader
- Accessory Support Clip
- Intake Filter with Silencer and Replaceable Element
- Air-Cooled Aftercooler
- Totally Enclosed Steel Belt Guard
- Safety Relief Valve
SPECIFICATIONS
| HORSE POWER | 1.5 HP |
| CFM DISPLACED | 10.1 CFM |
| CFM DELIVERED | 7.3 CFM @ 90 PSI |
| PUMP/MOTOR RPM | 1725 RPM |
| OVERLOAD PROTECTION | Yes (Manual Reset Standard) |
| LUBRICATION TYPE | Splash Lubrication |
| PUMP OIL CAPACITY | 17 oz. |
| REED VALVE SYSTEM | Yes (Standard) |
| NUMBER OF CYLINDERS | 2 |
| TANK CAPACITY | 9 Gallons |
| L X W X H | 46"x19"x24" |
| DECIBEL RATING | Unavailable |
| COUNTRY OF ORIGIN | Compressor Origin.pdf |
| SHIPPING WEIGHT | 175 lb. |
