Product Description
The EASYGRES drill kits are the most economical solution for those users who need to make perforations of different diameters in all types of ceramic tiles.
EASYGRES are diamond electrodeposited drills, wet cut, suitable for use with electric drill without hammer.
The quality of the diamond used in the design and manufacture of the EASYGRES drill bits allows the drilling of stoneware, porcelain stoneware, granite, marble and glass.
RUBI offers different construction kits to the construction professional, with configurations adapted to the most common situations.
For the smallest diameters (from Ø 6 to 12 mm), RUBI offers a practical EASYGRES kit consisting of: one or several drill bits (depending on the model), the practical EASYGRES guide, the corresponding centering sleeves (depending on the number of bits included in the kit) ) and the fixing adhesives.
The EASYGRES guide allows holes to be made both on the ground and on the wall, thanks to the functional design of its water tank that incorporates a flow regulating tap. The guide adheres easily to any surface, thanks to its system of renewable adhesives.
In addition to these practical kits, RUBI also offers the EASYGRES PLUS kit consisting of: 7 EASYGRES drill bits (Ø 20, 28, 35, 43, 50, 68 and 75 mm), a MULTIDRILL centering guide, a tank and hose assembly and a practical suitcase case. Finally, and thinking about the most common use of this type of drill, is the EASYGRES kit Ø 35 mm. This kit offers the possibility of acquiring the most used drill diameter (Ø35 mm) along with all the necessary accessories: MULTIDRILL guide and reservoir set with hose. The average life of the EASYGRES drill varies according to the diameter. In the EASYGRES from Ø 6 to 12 mm the average life is 10 holes and in the EASYGRES from Ø 20 to 120 mm the average life is 25 holes. The average life of the drills depends ALWAYS on the type of material, its thickness and the correct cooling and use. The drilling depth of the EASYGRES drill bits is 25 mm. The EASYGRES drill bits have a lateral opening that improves the cooling of the bit and facilitates the elimination of solid waste after each hole. Before making a new perforation, we must make sure that the bit is clean and free of any obstruction. The recommended speed of use for EASYGRES drills is between 400 and 1000 r.p.m., depending on the material to be drilled. For a better finish and longer life of the bit, it is important to respect the proper speed of rotation and exercise moderate pressure during drilling.
Features
- The EASYGRES guide allows holes both vertically and horizontally, thanks to its functional design incorporating a water tank with flow control valve.
- The EASY GRES guide attaches easily to any surface, thanks to its renewable adhesives.
- Diamond drill bits to be used with electric drill without hammer.
- The quality of the diamond allows the drilling of ceramics, porcelain, granite, marble and glass.
- Ideal to install bathroom accessories and any type of decorative accessories over ceramic surfaces.
- They must always be used with the EASY GRES guide which allows their adecuate refrigeration ensuring a high accuracy and good results.
- Average life between 5 and 10 holes depending on the material.
- .Body made of steel and bit made of electrodeposited diamond.
- Lateral opening to improve cooling of the drill bit and to allow the elimination of solid waste produced after the drilling of the hole.
- Recommended speed of use between 400 and 1000 r.p.m. depending of the material to be drilled.
- To achieve a better finish and a longer life of the drill bit, it’s important to observe the adequate speed of use and to apply a moderatepressure during the drilling. Supplied in blister.
