Body shop Tools

Mo-Clamp Frame Wrench 4049

Allows easy access to the bends and waves resulting from frame straightening. Helps in achieving the "pre-accident condition" look. Eliminates unsightly hammer marks of the frame. Designed for c-frame construction. Two different angles to access the...

Mo-Clamp Angle Bracket 4035

Bolt to surface for a 90-degree straight pull or use with #4030 3-Way Pull Clamp, pair of #4025 Frame Rack Jaws or #4010 Frame Rack Unibody Clamp. Overall Length: 6" (152 mm) Weight: 4 lbs (1.81 kg) Capacity: 6 tons (5,443 kg) Heat Treated Steel. Made in...

Mo-Clamp Three-Way Pull Clamp 4030

Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop. Gripping Surface: 4" wide (102 mm), 1/2 " deep (19 mm) Overall Length: 8" (203 mm) Weight: 8 lbs (3.63 kg) Capacity: 6 tons (5,443 kg) Replacement Parts:...

Mo-Clamp BMW Hold Down (set of 4) 4028

For holding BMW vehicles with oblong or round jack tube holes. Overall Length: 14" (356 mm) Weight: 37 lbs (16.79 kg) Capacity: 6 tons (5,443 kg) Replacement Parts: #5249 Nut, Bolt & Washer, #402801 Rocker Pin Heat Treated Steel. Made in the U.S.A.

Mo-Clamp Frame Rack Jaws 4025

Clamp has recessed pockets to hold bolts stationary for easy tightening. Gripping Surface: 4" wide (102 mm), 1/2 " deep (19 mm) Overall Length: 5" (127 mm) Weight: 8 lbs (3.63 kg) Capacity: 6 tons (5,443 kg) Replacement Parts: #4045 Nut, Bolt &...

Mo-Clamp Frame Rack Dyna-Mo Clamp 4024

Make your own tool with this severe duty tooth designed clamp. Add side pull bracket when needed. Machine Tooth Design. Gripping Surface: 31/2" wide (95 mm) Weight: 4 lbs (1.8 kg) Capacity: 5 tons (4,536 kg) Replacement Parts: #5200 Nut, Bolt &...

Mo-Clamp Frame Rack Dyna-Mo #2 4022

Two pair Frame Rack Dyna-Mo jaws with 12" draw bar, one side pull bracket, shackle and oval loop. Raised "ears" to hold bolt in place while tightening. Machine tooth design. Gripping Surface: 9 1/4" wide (235 mm) Overall Length: 12 1/2" (318 mm) Weight:...

Mo-Clamp Frame Rack Dyna-Mo #1 4021

One pair Frame Rack Dyna-mo jaws with 7" draw bar, one side pull bracket, shackle and oval loop. Raised "ears" to hold bolt in place while tightening. Machine tooth design.   Gripping Surface: 31/2" wide (95 mm) Overall Length: 7" (178 mm) Weight: 7...

Mo-Clamp Four-Way Pull Clamp 4020

Clamp has recessed pockets to hold bolts stationary for easy tightening. Includes #4043 Oval Loop. Gripping Surface: 4" wide (102 mm), 3/4 " deep (19 mm) Overall Length: 8" (203 mm) Weight: 12 lbs (5.45 kg) Capacity: 6 tons (5,443 kg) Replacement Parts:...

Mo-Clamp Frame Rack Clamps w/ Angle Brackets (Set of 4) #4015

Will hold down cars with horizontal pinch welds including Honda 1990 and up. Angles can be drilled to fit frame racks, benches, etc. Includes two #4044 1/2 " Shackles. Gripping Surface: 13" wide (330 mm) Overall Length: 16" (406 mm) Weight: 50 lbs (22.68...

Mo-Clamp Frame Rack Unibody Clamp 4010

Bar holes designed for three ways of pulling, using #4044 1/2 " Shackle and #4043 Oval Loop. Clamp has recessed pockets to hold bolts stationary for easy tightening. Gripping Surface: 8" wide (203 mm), 3/4 " deep (19 mm) Overall Length: 141/2" (368 mm)...

Mo-Clamp Quick Hook #1900

Four hole-size selection for quick hook-ups in existing frame holes for pulling of damaged frames. Uses Mo-Clamp's easy chain hook-up system. Hole sizes: 1?" (48 mm), 1?" (41 mm), 1" (25 mm), ?" (22 mm). Overall Length: 61/2" (165 mm) Weight: 3 lbs (1.36...