Body shop Tools

Mo-Clamp Down Pull Assembly 5810

For straight down or angled pulling. Works with pulling towers and bench systems. Large 5 inch wheel prevents undue chain wear. Secured with 1 inch heat-treated pin. When used with the #5811 Block Pulley Adapter it offers horizontal pulls. Overall...

Mo-Clamp Mo-Block Dolly for Frame Rail 5710

Straighten frame rails in about 80-percent of front-end damage cases. Inserted into the frame rail pocket, the dolly straightens the high strength, low-alloy metal easily and quickly. Dolly design keeps hands and fingers safely away from the impact area...

Mo-Clamp Hinge Plate 5623

Use in existing holes in frame structures or body panels. Comes with #5626 ?" Shackle for angle pulls. Overall Length: 4" (101mm) Weight: 2 lbs (.91kg) Capacity: 3 tons (2,722kg) Heat Treated Steel. Made in the U.S.A.

Mo-Clamp Tower Chain 5622

Many different shop uses. Use in correction of strut towers. For attachment to existing bolt holes. Designed for use with 3/8" chain. Overall Length: 19" (483mm) Weight: 2 lbs (.91kg) Capacity: 2 tons (1,814kg) Heat Treated Steel. Made in the U.S.A.

Mo-Clamp Door Post Puller/Twister 5616

Designed to put a twist in your pull with its V-shaped gusset. There are three positions from which to pull. For use on bolt-type hinge pillars. Overall Length: 51/2" (133mm) Slots:1/2" x 11/2" (12mm x 39mm) Weight: 2 lbs (.91kg) Capacity: 2 tons...

Mo-Clamp All-Angle Clamp 4065

One of the toughest little clamps we have ever built. Both straight pull or right angle with an infinite twist capability. Mo-Grip™ surface has been applied to the jaw surfaces for a better bite on the new carbon and UHSS steels. This should end up...

Mo-Clamp Mity-Bite Clamp 4060

Makes possible one- or two-directional pulling and can be used in a confined area. Gator teeth grip metal firmly. Gripping Surface: 2" wide (51 mm) Overall Length: 81/2" (21 mm) Weight: 4 lbs (1.81 kg) Capacity: 3 tons (2,722 kg) Replacement Parts: #5225...

Mo-Clamp Junior Versa Hook 1360

The Junior Versa Hook is designed smaller to allow bodymen to get into tighter areas. The Junior Versa Hook end is only 13/4" wide for pulling on rocker panels, door posts, etc. The back lip is used for a tie-down to secure the vehicle during pulls. The...

Mo-Clamp Versa Hook 1350

The Versa Hook is a versatile tool used as an outer track tie-down to secure vehicles during pulls. It is used as a pulling device for rocker panels, door posts, windshield posts, etc. Original straight-cut tooth design. Versa Hook end is 2 1/2" wide...

Mo-Clamp Bolt Puller 1340

Made for those difficult to get at suspension and frame bolts that need the area they screw into realigned or straightened. Use this for up to a 2.5 ton pull and be certain you are dead center over the bolt area. Uses the oem bolt to pull against the...

Mo-Clamp Slim Line Sill Hook 1320

Use this new hook from Mo-Clamp to pull front hinge pillars, center pillars posts, rear hinge sections or any location where you need a broad, thin pulling surface. Made from Mo-Clamp Tru-Tuff© drop-forged, heat-treated alloy steel with a pulling...

Mo-Clamp Sill Hook 1300

One of the handiest tools in the shop for a quick pull almost anywhere. New round opening allows for pulling with a slip hook. New casting process makes for a tighter grain structure, resulting in more strength. The original straight-cut tooth design...