CMT Orange Tools

CMT 880.531.11,3/4,Solid Surface No-Drip Router Bits

This bit is designed to create “no-drip” edges on kitchen and vanity counter tops in a single pass. For use on hand-held portable routers. This...

CMT 880.541.11,2'' + 1/8'',Solid Surface Rounding Over Bowl Bits

These bits are the best tool for rounding over and trimming countertop edges after the bowl is mounted.Can be used together with the CMT 8/980.551.11 bevel...

CMT 880.542.11,2'' + 1/8'',Solid Surface Rounding Over Bowl Bit (ogee profile)

These bits roundover and trim the countertop edges after the bowl is mounted.Can be used with the CMT 8/980.551.11 and 8/966.501.11 bevel cutter for a flush...

CMT 880.551.11,1'' + 1/8'',Solid Surface Bevel Bowl Bits

These bits are designed for undermount applications joining the countertops and sink bowls with a 10 (degree) beveled edge. Can be used with the 880.541.11...

CMT 880.571.11,3/4'',Solid Surface Sink And Trim Bits With Bearing

Trim a sink cut-out flush with the bowl in stages using these "over-hang" and flush trim bits. The Delrin® bearings are tapered to match the slope of the bowl's side...

CMT 880.572.11,55/64'',Solid Surface Sink And Trim Bits With Bearing

Trim a sink cut-out flush with the bowl in stages using these "over-hang" and flush trim bits. The Delrin® bearings are tapered to match the slope of the bowl's side...

CMT 881.501.11,1'',Solid Surface No-Drip Router Bits

This bit is designed to create “no-drip” edges on kitchen and vanity counter tops. Designed for hand-held portable routers on applications where a...

CMT 881.511.11,5/8'',Solid Surface Drainboard Router Bits

This bit is ideal for creating custom drainboard patterns in solid surface countertops.   For use on hand-held portable routers. Cutting Length:1/2'' ...

CMT 881.512.11,1'',Solid Surface Drainboard Router Bits

This bit is ideal for creating custom drainboard patterns in solid surface countertops.   For use on hand-held portable routers. Cutting Length:1/2'' ...

CMT 881.521.11,29/32'',Solid Surface Bevel Bits

Edge profile bit designed to create a 15° beveled edge on solid surface countertops.Can also be used for European type topmount installation with...

CMT 881.531.11,5/8'',Solid Surface Wavy Joint Router Bits

These bits are ideal for making strong joints on any solid surface, thanks to a wider area for glue. Cutting Length:2'' +...

CMT 881.541.11,1'' + 5/16'',Solid Surface Cut & Plug Repair Set

These special carbide-tipped bits work best on solid surfaces or when repairing damaged surfaces. To repair, create the plug with the plug-cutter first, then...