Product Description
CTA 8075 Pilot Bearing Puller - Slide Hammer
The CTA 8075 Pilot Bearing Puller - Slide Hammer is a professional automotive specialty tool from CTA Manufacturing, built for shop and technician use.
Features
- For inside pulling jobs, jaws will remove flywheel pilot and other bearings
- Range: 1/2" to 1-1/2" (13mm to 38mm)
- 8070x06 - Standard Range - 1/2" to 1-1/2" (13mm to 38mm I.D.)
- 8070x07 - Small Range - 3/8" to 1-3/8" (9.5mm to 35mm I.D.)
- Using the nuts and bolts provided, assemble the jaws to the yoke with the jaw notches toward each other.
- Thread the adjusting cone on the puller rod concave side first so that the external taper is toward each other.
- Thread the yoke on the rod, then install and tighten the large nut.
- Place the jaws evenly around the component to be pulled, then turn the adjusting cone so its taper forces the jaws tightly against the component.
- Slide the hammer against its stop repeatedly until the component is removed.
- Using the nuts and bolts provided, assemble the jaws to the yoke with the jaw notches facing outward.
- Thread the adjusting cone on the puller rod convex side first so that the internal taper is toward each other.
- Place the jaws inside the component to be pulled, then turn the adjusting cone so its taper forces the jaws tightly against the inside diameter of the component.
Specifications
Model: 8075
Brand: CTA
Manufacturer: CTA Manufacturing
MPN: 8075
Shipping weight: 4.2 lb
Shipping / box dimensions: 14" W × 10" D × 5" H (estimated shipping carton)
Applications
- Component removal and installation