Product Description
Diesel Air Heater Dual-Motor All in One
This is a 12V/24V all-in-one diesel air heater with brushless dual-motor variable-frequency control, a built-in 6 L (1.6 gal) tank, two air outlets, remote control and LCD panel. It provides fast, fuel-efficient heat for vehicles, RVs, boats, campers, garages and other enclosed spaces where a reliable diesel-fired heat source is needed. Covered by the manufacturer's warranty. Ships free.
Features
Brushless Dual-Motor Control: Two motors with independent variable-frequency control separately adjust combustion air and warm-air output for more precise heat and less fuel waste.
Fast Heating: Warm air in as little as 2 minutes, covering about 161-377 ft² / 15-35 m²; warm-air reach up to 16.4 ft / 5 m. Two air outlets.
Low Noise and Efficient: Uses 0.03-0.1 gal/h (0.12-0.37 L/h) with a 6 L / 1.6 gal tank and ≥82% combustion efficiency; exhaust muffler and sound insulation keep noise low.
Dual Control: LCD panel and remote control (up to 98 ft / 30 m) with a 50-113°F / 10-45°C temperature range and preheating.
Protective Features: Exhaust heat shield and insulation sleeve, leak-proof fuel cap, visible fuel-level markings and over-temperature protection.
High-Altitude Use: Stable operation at elevations up to 16,404 ft / 5,000 m.
Technical Specifications
Model: 100-6977
Brand: Quality Import
Type: All-in-one portable diesel air heater
Fuel: Diesel
Color: Black / orange
Operating Voltage: DC 12-24V
Temperature Adjustment Range: 50-113°F / 10-45°C
Fuel Consumption: 0.03 - 0.1 gal/h(0.12 - 0.37 L/h)
Power: 3.16 kW
Net Weight: 23.1 lbs / 10.5 kg
Product Dimensions: 20.28 x 8.66 x 18.31 in / 515 x 220 x 465 mm
Dimensions & Weight
Product Dimensions:
20.28 in. × 8.66 in. × 18.31 in.
Net Weight:
23.1 lb
Dimensions and weight are the manufacturer's published product specifications; carton size was not published.
Included Accessories
All-in-one dual-motor diesel heater with 6 L / 1.6 gal tank
2 air outlets
2 air ducts
4 air duct connectors
Exhaust pipe
Heat insulation sleeve
Muffler
2 mounting brackets
Fuel funnel
Power cord
Remote control
Installation kit
Applications
RVs, motorhomes, campervans and travel trailers
Semi trucks, box trucks, vans and work vehicles
Boats and cabins
Garages, workshops, sheds and job-site trailers
Camping, ice fishing and other off-grid outdoor use
Installation & Operating Notes
Use diesel fuel only. Never use gasoline or other fuels.
All-in-one design: set the unit on a stable, level surface, attach the exhaust pipe and route it outdoors, connect the warm-air duct, fill the tank with diesel and connect power.
The exhaust must always be routed to the outside of the vehicle or enclosed space; never run the heater with exhaust vented indoors. Use a working carbon monoxide detector and keep ventilation openings clear.
Keep the exhaust pipe and muffler away from flammable materials; they become very hot during operation.
The heater needs continuous power while running and through its cool-down cycle. Do not cut power to shut it off; use the controller so the fan can purge and cool the burner.
Allow the fuel pump to prime on first use; several ignition attempts may be needed before fuel reaches the burner.
Read the supplied user manual before installation and operation.