Product Description
A compact steel-belt oil skimmer for CNC coolant tanks, emulsion pools, and cleaning fluid reservoirs. A continuous oleophilic steel belt lifts floating oil off the liquid surface; self-adjusting scrapers wipe both sides of the belt and drain the collected oil into a discharge trough. It is designed to remove free-floating tramp oil so coolant and wash fluid last longer and stay cleaner.
Features
- Steel belt, double-sided skimming: a 2 in (50 mm) heat- and chemical-resistant steel belt picks up oil on both faces for faster collection.
- Rated oil removal: up to 13 L/h (about 3.4 gal/h), depending on oil type, temperature, and surface conditions.
- Manual or timed automatic operation: run continuously, or use the built-in timer to set start/stop cycles across a 24-hour period.
- Compact industrial housing: corrosion-resistant body with a carry handle and a small footprint for tank-side mounting.
- Self-adjusting scrapers: the scraper assembly collects oil from the belt and can be tensioned for reliable wiping.
- Standard 110V power: 14W draw with a U.S. plug; ready for shop use without a special power supply.
Typical uses
CNC machining centers and lathes, metalworking coolant and rolling emulsion tanks, parts washers and degreasing baths, and other sumps where tramp oil collects on the surface. Also used in shops that need to recover floating oil from process or wastewater tanks.
Specifications
- Model: JY-50T
- Oil removal capacity: 13 L/h (approx. 3.4 gal/h)
- Steel belt width: 50 mm (2 in)
- Voltage: 110V
- Power: 14W
- Control: manual or automatic (timer)
- Net weight: 4 kg (8.8 lb)
- Package dimensions: 11.02 × 10.24 × 9.06 in
- Shipping weight: 8.8 lb
What's Included
- Oil skimmer with steel belt and scrapers
- Power cord with U.S. plug
Important Notes
- This unit removes free-floating oil. It is not intended to separate oil that is fully chemically emulsified into the fluid.
- For best results, keep the liquid temperature at or below 158°F (70°C) and the pH between about 3 and 11. Recovery rate can drop as temperature rises and viscosity changes.
- If the tank is being agitated, skimming is more effective during periods when mixing is stopped.
- Disconnect power before inspecting, adjusting, or cleaning the unit. Keep the controller and motor housing dry.
- Confirm the supply voltage matches the 110V nameplate before connecting power.