Product Description
Desktop CNC enclosure kit (Genmitsu KABA Lite, part no. 101-63-KBL3018) designed for 3018-size desktop CNC routers. It helps contain dust and debris, reduces noise, and lets you watch the job safely while keeping your workspace clean.
Features
- Compatibility: Fits Genmitsu CNC 3018 series machines (3018 / 3018-PRO / 3018-MX3 / 3018-PROVer / 3018-PROVer V2) and the 1810-PRO, or any other machine smaller than 18.3 x 15.5 x 12 in (464 x 394 x 304 mm).
- Light and easy to assemble: No screws needed; the enclosure simply drops over the desktop CNC.
- Magnetic front door: Easy access to the machine for bit changes and maintenance.
- Dust control: Cuts down dust and keeps your desktop or workbench clean.
- Enhanced safety: Reduces the risk of flying debris while you watch the job process.
- Noise reduction: Rated "Good (10 dB)" by the manufacturer.
- Two pre-cut access holes: For the offline controller, emergency stop, cable management, or external devices such as a dust-collection vacuum.
Specifications
- Manufacturer model / part number: Genmitsu KABA Lite, 101-63-KBL3018
- Box dimensions: 450 x 390 x 300 mm (17.71 x 15.35 x 11.81 in)
- Volume capacity (max. machine size): 464 x 394 x 304 mm (18.3 x 15.5 x 12 in)
- Panel material: clear, high-toughness plastic panels (manufacturer specifies 2 mm acrylic wall thickness) with aluminum bracket / metal siding trim frame
- Weight: 3 kg (6.6 lbs)
- Assembly difficulty: moderate
- No power required
What's in the Box
- 1 x KABA Lite CNC enclosure kit (assembly required): 5 x panels, 12 x aluminum brackets, 8 x buckles, 4 x aluminum bracket covers, 1 x door handle with screws, 1 x anti-slip base tape
Assembly Notes
- Tear off all protective films before installation.
- When installing the panels, align the panel edges with the clamps.
- Do not knock the panels with sharp objects.
- Install the magnetic door panel last.
CNC machine not included. Genmitsu is a trademark of its respective owner; model names are listed for compatibility identification.
