Michigan

0-8" Dial Caliper Black Face

Of stainless steel, hardened throughout with sat-in-chrome finish. Suitable for outside, inside and depth measurement. Thumb roll. Direct reading in .001” or .02mm with adjustable dial setting...

0-8" Dial Caliper White Face

Of stainless steel, hardened throughout with sat-in-chrome finish. Suitable for outside, inside and depth measurement. Thumb roll. Direct reading in .001” or .02mm with adjustable dial setting...

0-8in Dial Calipers

0-8in Dial Calipers Of stainless steel, hardened throughout with satin-chrome finish. Suitable for outside, inside and depthmeasurement. Thumb roll.

1-1/2-1-1/2 External Dial Calipr

1-1/2-1-1/2 External Dial Calipr • For measuring insidediameters, recesses, etc.• Can be set with amicrometer or ring gage.• Graduated in .001”.• Arms automatically openand...

1-1/2-2-1/2 Internal Dial

1-1/2-2-1/2 Internal Dial  Range 1-1/2 - 2-1/2   For measuring insidediameters, recesses, etc.• Can be set with amicrometer or ring gage.• Graduated in ...

1-1/8-2-1/8 External Dial Caliper

1-1/8-2-1/8 External Dial Calipr • For measuring insidediameters, recesses, etc.• Can be set with amicrometer or ring gage.• Graduated in .001”.• Arms automatically openand...

1-1/8-2-1/8 Internal Dial

INTERNAL & externalDIAL CALIPERS For measuring insidediameters, recesses, etc.• Can be set with amicrometer or ring gage.• Graduated in .001”.• Arms automatically openand...

1-2-3 BlocksS hardened and precision-ground blocks

1-2-3 BlocksS hardened and precision-ground blocks. Sizes 1 x 2 x 3   Used in layout and setup work.Each set consists of 2 matched,hardened and precision-groundblocks. The...

10in - 250mm Spring Calipers Dividers And Sets

10in - 250mm Spring Calipers Dividers And Sets Legs machined to rigid length and balance.Hardened and tempered spring. Polished finish. Flat leg pattern. • Three piece set consists of oneeach of...

110 PC Sae and Metric Bearing Steel Tap and Die Rethreading Kit

Tap and Die Bit Diversity – These tools are sold as a set for good reason. You really should look to get as much diversity in the sizes of the taps and dies as you can. That way you will be...

12" Calipers With Locking Screw

12" Calipers With Locking Screw All measurements can be read directly from vernierscale. Micro-fine black graduation on a satin chromefinish for easy reading. Jaws designed for outside,inside, and...

12" Electronic Caliper

Rugged construction of stainless steel withno rack, no pinion, and no glass scale. 5 Digit highcontrast display• Inch / Metric switch• Floating “Zero”reference point•...