Engine

20020 LIMITED ACCESS SPARK PLUG CHASER

Fits Spark Plug Holes with Limited Access. The narrow profile and long length allows access to spark plug holes in confined spaces. Use with a 3/8" ratchet or extension. Size: M14x1.25 IMPORTANT: Use anti-seize.

20380 M16X1.5-6G ADAPTER FOR 20250

For Use with 20250 Compression Tester. Can be used with the 20250 Compression Tester to adapt the tool to work on 2005 Ford Triton engines with M16x1.5-6G threads.

20530 10MM SPARK PLUG ADAPTER

10mm Spark Plug Adapters for 20250 Compression Tester. The 20530 is a 10mm thread adapter.

20540 12MM SPARK PLUG ADAPTER

12mm Spark Plug Adapters for 20250 Compression Tester. The 20540 is for 12mm spark plug threads.

48300 PUSH ROD REMOVER

Redesigned for Newer 3.5L and 3.6L GM Engines. Also Works on GM V6 2.8L, 3.1L and 3.4L.   Quickly removes push rods so you can replace the intake gasket.  No need to loosen and retighten the rocker arm.   The tool pivots the...

52700 AUDIO STETHOSCOPE

Detects Noise From Vacuum Leaks, Exhaust Leaks, Wind Noise and Air Leaks. Place funnel over suspected air leak. Detects air induced sounds not detected by conventional stethoscopes.

52750 STETHOSCOPE KIT

Dual Purpose Set Detects Both Mechanical and Air Induced Sounds. Use the black diaphragm chamber and screw-in metal probe to detect mechanical sounds from bearings, engines, transmissions, etc. For air induced sounds, attach the vinyl hose to the hollow...

56600 - OBSOLETE AT FACTORY T-55 TORX HEAD BOLT BIT

Extended 3" Long T-55 Torx bit for Use on Head Bolts on Chrysler 2.4L New World Engines. Standard bits cannot reach the deeply recessed fasteners. Made from durable S2 steel. Use with 1/2" socket.

65700 BROKEN PLUG REMOVER KIT FORD 3V

A Three Step Kit for Removing Spark Plugs that have Seized in the Engine Head and Broken.  Includes a unique Porcelain Puller Tool that snaps onto the terminal of a broken spark plug to pull the porcelain out. Also includes a Porcelain Pusher for...

77080 19MM HARMONIC BALANCER SOCKET

This Heavy-Duty Impact Socket is Designed with More Than Three Times the Standard Socket Mass to Direct More Energy to Removing the Bolt. Can be used on Honda engines that use a 19mm hex pulley damper bolt or other 19mm applications. Made with...

77260 - OBSOLETE AT FACTORY HARMONIC BALANCER PULLEY DAMPER HOLDING TOOL FOR HON

Designed with a 4" Offset for Holding the Damper when Removing and Installing the Crank Bolt on Many Honda and Acura Engines. Designed with a 50mm outer hex and large center opening to fit impact sockets. Use with a 1/2" drive ratchet or breaker bar to...

13900 OIL PRESSURE SWITCH SOCKET FOR FORD

Partial Hex Design to Fit 1-13/16" Oil Pressure Switches on some 2015-2017 Ford and Lincoln Vehicles with 4 and 6 Cylinder Engines. May also fit some aftermarket sending units. Overall socket length is 2" to fit in tight spaces. Use with 3/8" square...