Lisle

Coil Tester (Discontinued) See 10001

Quickly Check Ignition Coils. Use on the car or on the bench to accurately test ignition coils. To check an ignition coil, connect the tester to the coil. Set the spark tester (included with the...

Combination Flaring Tool

Works for Single and Double Flares, Also ISO (Bubble) Flares. This set includes all the adapters and tools necessary for single and double flaring (standard and metric) plus the ISO (bubble) flare...

Combination Internal / External Snap Ring Pliers

A handy combination tool for internal and external snap rings. Compresses internal rings in one position. Move the quickchange reversing lever to expand external rings. Comes with four sets of tips...

Combustion Leak Detector

Quickly Pinpoints Combustion Leaks. Detects bad head gaskets, cracked blocks, & cracked or warped heads. Fluid changes from blue to yellow when exposed to combustion gases from the radiator. Connect...

Combustion Leak Detector Fluid For Diesel

Detects Combustion Leaks on Diesel Engines. Use the diesel leak detector fluid with the Lisle 75500 Combustion Leak Detector. Indicating fluid changes from red to yellow when exposed to diesel...

Compression Tester

Quickly and Accurately Check Compression on Gasoline Engines. Gauge registers 0 - 300 P.S.I. and 0 - 2100 kpa. Fits 14mm and 18mm thread sizes.Quickly and Accurately Check Compression on Gasoline...

Compression Tester Adapter, for 10mm Spark Plug Threads

...

Computer Safe Circuit Tester

Also Indicates Polarity. Safe for automotive computers. Won't damage sensitive electronic components. Draws less than 21 mA. at 12 volts DC. Operating range 3-28 volts. The red light indicates...

Computer Safe Circuit Tester and Polarity Indicator

Works Without Damaging Sensitive Electronic Components. Safe for use on 12 volt automotive computer circuits. Tool draws less than 21 m.a. at 12 volts DC with an operating range of 3 - 28 volts. Red...

Continuity Tester (Discontinued)

Check continuity on wires, fuses, switches and other electrical systems. Just clip lead to one end of wire in question. Probe other end of wire. If bulb lights up, there is continuity. If bulb fails...

CV Boot Clamp Pliers

For Earless-Type Clamps. A sturdy, low-cost tool. Works on earless-type clamps including those found on GM inboard CV joints.  

CV Boot Clamp Pliers-1

For Ear-Type Clamps. For all ear-type clamps including GM FWD outboard CV joints. Designed for use with a torque wrench, as required for stainless steel bands.