Lisle

Fuel Line Disconnect Set For Ford Trucks (Discontinued)

Quickly Disconnects Both Rear Fuel Tank Lines. Tools fit 1992 to present F Series Ford trucks with 4.9, 5.0, 5.8 and 7.5 liter engines. Use the 3/8 inch tool for fuel supply line & 5/16 inch tool...

Fuel Module Disconnect Tool For GM

Disconnects the Fuel Module on 98 & Later GM Full Size Pickups, Suburban & Tahoe.Two piece design allows access to the connectors. Slide the proper size end into the connector. Rotate and...

Fuel Tank Lock Ring Tool

• A Stout Tool To Remove and Install Plastic Fuel Tank Lock Rings from 4" to 7-1/4" Without Damage.• Channel design on body allows the legs to adjust to fit a wide range of applications and...

Fuel Tank Lock Ring Tool 63000

Channel design on body allows the legs to adjust to fit a wide range of applications and keeps the drive centered. Works on the new smaller GM serrated rings and traditional rings. The design is...

Fuse Puller (Discontinued)

Makes Pulling Fuses Easy. No more stuck or broken fuses. For both glass and blade type fuses.  

Gasoline Engine Compression Tester For Recessed Plugs (Discontinued)

Works on Heads With Deep Hole Plugs, Hemi Engines and Conventional Engines. Accurately checks compression on gasoline engines. Includes a 9 inch removable steel extension to access 14mm spark plug...

Handy Hooker Circuit Tester

Hooded Probe Protects Your Fingers and Automatically Centers the Wire.mall size allows easy use even in the tightest places. Quickly test low voltage up to 28 volts. Alligator clip grounds tester...

Handy Packer Bearing Packer

Quickly Flushes Out Old Grease and Repacks Bearings with Less Mess.The Handy Packer works on bearings up to 3 1/2 inch O.D. The grease stays in the tool cavity, not on your hands. To pack a bearing,...

Harmonic Balancer Installer

Installs Harmonic Balancers or Drive Pulleys that are Pressed on the Crankshaft.This set includes a driving screw, thrust bearing and threaded adapters necessary to work on a wide range of domestic...

Harmonic Balancer Puller for GM

The 45300 is equipped with the special bolts and adapters to pull the harmonic balancer cleanly without damage to the crank sensor. Order the 45350 Retrofit Kit to use with your Lisle 45500 Harmonic...

Harmonic Balancer Puller LIS45500

Designed to ease the operation of pulling the balancer pulley. It reduces damage to both the pulley and the shaft. Designed to ease the operation of pulling the balancer pulley. It reduces damage to...

Harmonic Balancer Puller Set-1

This Kit Features The Puller Hardware And Special Pulling Screws To Remove Most All Automotive Harmonic Balancers.The kit includes a standard harmonic balancer puller, pulling screws and adapters for...