Lisle

Bearing Race and Seal Driver Set w/Case

Makes it Easier to Insert Bearing Race.Insert bearing race quickly, straight in on FIRST TRY! Helps reduce damage to both race and axle housing. Turn driver over to drive seals.Makes it Easier to...

Bearing Race and Seal Driver Sets

Makes it Easier to Insert Bearing Race. Insert bearing race quickly, straight in on FIRST TRY! Helps reduce damage to both race and axle housing. Turn driver over to drive seals.Makes it Easier to...

Big Range Filter Wrench (Up to 6 in )

Adjusts quickly to fit any spin-on oil filter up to 6 inch diameter. Use with 1/2 inch drive or 3/4 inch wrench. Strong polypropylene belt.Adjusts quickly to fit any spin-on oil filter up to 6 inch...

Blue Low Profile Plastic Creeper

Features and Benefits: Urethane rollers Low profile, 7/8" floor clearance Surface is resistant to solvents, greases and fuels Dimensions: Length 38", Width 17 1/2", Height 4" Blue creeper This...

Body Mate (Includes 5 Handy Body Trim Tools)

1. Angled screwdriver - pry trim panel fasteners. 2. Fork - pop off panel fasteners, inner trim pads, door panel clips. 3. Point - line up holes, push out broken rivets. 4. T-15 Torx - adjust...

Brake Adjustment Tool

Speeds Star Wheel Adjusting. Insert tool through slot in backing plate. Different angle at each end adapts to various makes and models. Speeds Star Wheel Adjusting. Insert tool through slot in...

Brake Bleeder Wrench (1/4 in or 3/8 in )

For Bleeding Air From Brake Cylinders With Bleeder Screws. Double ended tools are offset for easy access. 10900 for 5/16 inch or 3/8 bleeder screws. 10950 for 1/4 inch or 3/8 bleeder screws.  

Brake Bleeder Wrench (5/16 in or 3/8 in )

For Bleeding Air From Brake Cylinders With Bleeder Screws. Double ended tools are offset for easy access. 10900 for 5/16 inch or 3/8 bleeder screws. 10950 for 1/4 inch or 3/8 bleeder screws.For...

Brake Caliper Bit Set

For Servicing Disc Brakes. Three 3/8 inch square drive sockets with hex bits to remove and replace floating caliper mounting bolts. 3/8 inch and 8mm hex bits for GM and 1/4 hex bit for Ford.For...

Brake Caliper Torx Bit Set

T-40, T-45, T-50 Sizes for Servicing Disc Brakes. Three 3/8 square drive Torx bits to fit GM and Ford brake caliper Torx boltsT-40, T-45, T-50 Sizes for Servicing Disc Brakes. Three 3/8 square drive...

Brake Spring Pliers LIS11260

Double Ended Tool for Removing and Installing Brake Springs. Use plier tips to stretch brake spring. Handle ends remove and install spring over anchor post.  

Brake Spring Tool

Makes it Easy to Remove and Replace Springs. A spring tool for removing and replacing brake return springs that are set over a post. Heat-treated end fitting engages hook and removes it from the post...