Urrea

5 Inch Diagonal Flush Cut Thin Jaw Electronics Pliers 28141

Self-opening, spring-loaded handles. Pointed and sharp nose for precision cutting of circuit board edges and burrs.  Exceed ASME B107.500 standard Tool Length: 5 inches Jaw Width: 1"...

5-1/2 Inch Cape Chisels 72-3/8

Tip wider than body. Edge opposite to tip designed to endure hits. Exceed ASME B107.410 standard.

5-1/2 Inch Cold Cut Chisels 86A-3/8

Designed to remove, cut or break materials with a hardness softer than the chisel’s, such as concrete, rock, slag, brass, untreated steel, nuts, bolts, pins, etc. It is widely used in the...

5-1/2 Inch Stubby Reversible Ratchets 5449S

Robust mechanism. Reversible system. Screwless design reduces the chance of accidental disarming. Easy repairing. To access restricted clearence areas. Screwless design.  Exceed ASME B107.110...

5-1/4 Inch Center And Prick Punches 41-7/16

50° center punches are used to mark pieces in manufacturing or assembly. 90° prick punches are used to center the bore point and

5-1/4 Inch Center And Prick Punches 44-3/8

50° center punches are used to mark pieces in manufacturing or assembly. 90° prick punches are used to center the bore point and

5-1/4 Inch Straight Drift Pin 47-5/16X1/8

Drift pins are used to install or remove guide bushings, pins, and center guides. Their length is important and it depends on the job. Straight pins can also be used to align holes when assembling...

5-1/8 Inch Cape Chisels 72-5/16

Tip wider than body. Edge opposite to tip designed to endure hits. Exceed ASME B107.410 standard.

5-1/8 Inch Cold Cut Chisels 86A-1/4

Designed to remove, cut or break materials with a hardness softer than the chisel’s, such as concrete, rock, slag, brass, untreated steel, nuts, bolts, pins, etc. It is widely used in the...

5-1/8 Inch Diagonal Cutting Heavy-duty Electronics Pliers 28141P

They all have high-endurance springs. All are electro static dissipative. With cushioned & ergonomic handles. Exceed ASME B107.500 standard. Tool Length: 5-1/8 inches Jaw Width: 45/64"...

5-1/8 Inch Full Flush Cut Electronics Pliers 170M

Self-opening, spring-loaded handles. Pointed and sharp nose for precision cutting of circuit board edges and burrs.  Exceed ASME B107.500 standard Tool Length: 5-1/8 inches Jaw Width: 3/4"...

5-1/8 Inch Rubber Grip Heavy-duty Fixed Retaining Ring Pliers 397

Forged/Spring-loaded handles (long-lasting precision spring). Tips made with high tensile Steel Thin tips to work on Reduced areas. -Forged Exceed ASME B107.500 standard. Tool Length: 5-1/8...