Urrea

5-3/4 Inch 45 Degree Angle Easy-change Convertible Retaining Ring Pliers 373

Unique patented design allows for quick changeover from internal to external use. High carbon, hardened steel tips and body Exceed ASME B107.500 standard. Tool Length: 5-3/4 inches Maximum...

5-3/4 Inch Amber Drive Hand Accessories 4768

Compatible with any 1/4” square drive socket or accessory. Makes work easy in hard-to-reach areas, specifically when repairing or assembling engines. Total Length : 5-3/4"

5-3/8 Inch Cold Cut Chisels 86A-5/16

Designed to remove, cut or break materials with a hardness softer than the chisel’s, such as concrete, rock, slag, brass, untreated steel, nuts, bolts, pins, etc. It is widely used in the...

5-40 IN/LB 1/4 IN DR MICROADJUSTABLED TORQUE SCREWDRIVER

5-40 IN/LB 1/4 IN DR MICROADJUSTABLED TORQUE SCREWDRIVER5-40 IN/LB 1/4 IN DR MICROADJUSTABLED TORQUE SCREWDRIVER

5-5/8 Inch Center And Prick Punches 41-1/2

50° center punches are used to mark pieces in manufacturing or assembly. 90° prick punches are used to center the bore point and

5-5/8 Inch Center And Prick Punches 44-7/16

50° center punches are used to mark pieces in manufacturing or assembly. 90° prick punches are used to center the bore point and

5-5/8 Inch Short Tapered Drift Punch 50-3/8

Drift pins are used to install or remove guide bushings, pins, and center guides. Their length is important and it depends on the job. Straight pins can also be used to align holes when assembling...

5-5/8 Inch Straight Drift Pin 47-5/16X5/32

Drift pins are used to install or remove guide bushings, pins, and center guides. Their length is important and it depends on the job. Straight pins can also be used to align holes when assembling...

5-5/8 Inch Straight Long Nose Electronics Pliers 28641

Self-opening, spring-loaded handles. Pointed and sharp nose for precision cutting of circuit board edges and burrs.  Exceed ASME B107.500 standard Tool Length: 5-5/8 inches Jaw Width:...

5-5/8 Inch Universal Joint Drive Hand Accessories 5870

This accessory allows you to work on screws found in tight or deep areas where the ratchet head cannot reach, and is available in different lengths. The maximum recommended torque for a 3/8”...

5-7/8 Inch 0 Degree Angle Easy-change Convertible Retaining Ring Pliers 372

Unique patented design allows for quick changeover from internal to external use. High carbon, hardened steel tips and body Exceed ASME B107.500 standard. Tool Length: 5-7/8 inches Maximum...

5-7/8 Inch 0 Degree Angle Easy-change Convertible Retaining Ring Pliers 399

Unique patented design allows for quick changeover from internal to external use. High carbon, hardened steel tips and body Exceed ASME B107.500 standard. Tool Length: 5-7/8 inches Maximum...